07.12.2017, 10:16 Uhr

BITMAIN ANTMINER S9 14 TH / S

Antminer S9 Specifications:
1. Hash Rate: 14 TH / s ± 5%
2. Power Consumption: 1372W + 10% (at the wall, with APW3, 93% efficiency, 25C ambient temp)
3. Power Efficiency: 0.098 J / GH + 10% (at the wall, with APW3 93% efficiency, 25 ° C ambient temp)
4. Rated Voltage: 11.60 ~ 13.00V
5. Chip quantity per unit: 189x BM1387
6. Dimensions: 350mm (L) * 135mm (W ) * 158mm (H)
7. Cooling: 2x 12038 fan front fan: 6000rpm, Rear fan: 4300rpm
8. Operating Temperature: 0oC to 40oC
9. Network Connection: Ethernet
10. Frequency: Automatically set
Notes:
Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter.
PSU: A power supply unit is not included. There are 3 PCI-E connectors for + 12V DC input on each hashing board and all 3 are required. Do not connect more than one PSU to the same hashing board!
We recommend the APW3 ++ - 1600 power supply for the Antminer S9. One power supply supports one Antminer S9.
Separate power supply to control board: there is an additional 6pin PCI-E connector on the IO board which must be connected to the PSU to get power. If you use different PSU for hash boards and control board, please make sure to power the hash boards first and the control board only after the hash boards have been powered.
1
Einem Mitglied gefällt das:
Weitere Beiträge zu den Themen
Schon dabei? Hier anmelden!
Schreiben Sie einen Kommentar zum Beitrag:
Spam und Eigenwerbung sind nicht gestattet.
Mehr dazu in unserem Verhaltenskodex.